Milling Service

 Zirconia Milling 

We use TGA registered medical device, please let us know if you want to need certificates.

UNC Everest Multilayer High Translucent Up To 45-48% (850-1150 Mpa)

for all general cases - single, bridge, full arch, anterior, posterior 

UNC Everest Multilayer High Strength Up To 1150-1250Mpa (42-45%)

for high strength required cases - implant full arch with cantilever or opaque required case - anterior bleach 

 

Price: AUD 60+GST 

Please click here to place a milling order.

 

 

 

 Custom Abutment Milling 

- Implant connection part is already milled
- Accurate implant connection and screw hole
- Abutment body and emergence profile will be milled for patients
  • High Accuracy Guaranteed (± 5μm)
  • High Quality Material
  • - Ti6Al-4V ELI(ASTM F136) Titanium Grade 5 (Carpenter Technology, US)  
  • 5 Axis milling = One-Step Milling = No Connector      
  • Two Screws Provided - One for lab work, Another one for Patients
 
     

Price: AUD 125+GST for One-step milling including Anodizing

 

 
Milling Machine - DOF CRAFT 5X (Click here for product info) 

5 Axis ONE-STEP Milling = No Connector 
Q. What is ONE-STEP Milling? 
Q. How to design good abutment? 

Please click here to place a milling order.

Available implant fixtures 

ADIN CLOSEFIT NP 3.0 / AD-A97
ADIN CLOSEFIT RP 3.5 / AD-A97-1
ADIN CLOSEFIT WP 4.3/5.0 / AD-A97-2
Astra Tech Osseospeed EV BLUE 4. / AD-A4
Astra Tech Osseospeed EV BROWN 5 / AD-A5
Astra Tech Osseospeed EV GREEN 3 / AD-A1
Astra Tech Osseospeed EV PURPLE / AD-A2
Astra Tech Osseospeed EV YELLOW / AD-A3
Astra Tech Osseospeed TXAqua 3.5 / AD-A7
Astra Tech Osseospeed TXLilac 4. / AD-A8
Astra Tech Osseospeed TXYellow 3 / AD-A6
Biohorizons Internal 3.0 / AD-A13
Biohorizons Internal 3.5 / AD-A13-1
Biohorizons Internal 4.5 / AD-A13-2
Biohorizons Internal 5.7 / AD-A13-3
Biomet 3i Certain Green 6.0 / AD-A15-2
Biomet 3i Certain Yellow 5.0 / AD-A15-1
Biomet 3i CertainBLUE 4.1/5.0/6. / AD-A15
Biomet 3i CertainPURPLE 3.4 / AD-A14
Dentium Super-Line / AD-A23
DIO UFII 3.0 (Narrow) / AD-A31
DIO UFII 3.8/4.0/4.5/5.0 / AD-A32
Implant Direct legacy 3.0 / AD-A13 (Biohorizons compatible)
Implant Direct legacy 3.5 / AD-A13-1 (Biohorizons compatible)
Implant Direct legacy 4.5 / AD-A13-2 (Biohorizons compatible)
Implant Direct legacy 5.7 / AD-A100-3
Megagen Anyridge / AD-A38
Megagen Blue Diamond NC (3.3) / AD-A39-5
Megagen Blue Diamond RC (4.0) / AD-A39-6
MIS Seven 3.3 / AD-A43
MIS Seven 3.75/4.2 / AD-A43-1
MIS Seven 5.0/6.0 / AD-A43-2
Neodent GM Implant Line / AD-A147-1
NEOSS Pro Active 3.25 / AD-A103
NEOSS Pro Active 3.5 / AD-A104
Nobel Biocare Active 3 / AD-A45
Nobel Biocare Active NP 3.5 / AD-A46
Nobel Biocare Active RP 4.3/5.0 / AD-A47
Nobel Biocare Active WP 5.5 / AD-A48
Nobel Biocare Replace RP 4.3 / AD-A53
OSSTEM TS Mini (3.0/3.5) / AD-A57
OSSTEM TS Regular (4.0/4.5/5.0) / AD-A58
Straumann BLX (3.75/4.5) / AD-A68-1
Straumann Bone Level NC (3.3) / AD-A63
Straumann Bone Level RC (4.1/4.8 / AD-A64
Straumann Tissue Level RN 4.8 / AD-A67
Straumann Tissue Level WN 6.5 / AD-A68
TRI Vent 3.5 / AD-A13-1 (Biohorizons compatible)
TRI Octa 4.8 / AD-A67 (Straumann Tissue RN compatible) 
 
*Please note that we use premilled cylinder blank, they are not affiliated to the implant manufacturers.

Please click here to place a milling order.

 

 

 

 Glass Ceramic (Lithium Disilicate) Milling 

 

  • Crown, inlay, onlay, veneer (0.3mm margin thickness required) 
  • HASS Rosetta lithium disilicate

 

AUD 80+GST each including firing

Please click here to place a milling order.