Recommend CAD Parameters for Better Milling

Recommend CAD Parameters for Better Milling

It is important to choose the right milling material at the beginning. 
It will affect to all parameters after that. 

 

Cement gap: 0.05-0.03mm 
(You need more cement gap between crown and custom abutment for 'One-step milling'.) 
Horizontal margin thickness (zirconia): 0.25mm
Horizontal margin thickness (glass ceramic): 0.4mm
Margin Angle 60 degree
Vertical: 0mm
Below margin: 0mm
Milling bur diameter: 0.8mm

Back to blog